LOKRING Straight Al Connectors Type 50LOKRING NK Al 50

[Translate to English:]

For connecting aluminium tubes and for connecting aluminium tubes to copper or steel tubes with identical tube outer diameters.

IMPORTANT: When connecting aluminium tubes to copper tubes, use a heat shrink sleeve to protect the connection against corrosion.

Technical Data

    • Max. operating pressure: 50 bar (725 psi).
    • Admissible refrigerants: Suitable for all HCs, HFCs and mixtures. Not suitable for NH3.
    • Temperature range: -50°C up to 150°C (-58°F up to 302°F).
    • Tube diameter range: 6.35 to 35 mm (1/4" to 1 3/8").
    • Minimum tube wall thickness: 0.8 mm.

    Application

    • Installation of HVAC systems
    • Repair of Vehicle A/C systems

    Material Combinations

    >>>Al-Al
    >>>Al-Cu
    >>>Al-St

    Equipment

    LOKTOOL LOKPRESS

    • Special hydraulic valve for quick and safe assembling of LOKRING Connections of type 50.
    • Diameters: 6 to 41.3…
    go to product

    LOKTOOL MZ-V

    • Specially developed for the LOKRING assembly
    • Patented lever mechanism for assembly with minimum effort
    • Assembly…
    go to product

    LOKRING NR Al 50

    For connecting aluminium tubes and for connecting aluminium tubes to copper or steel tubes with different…

    go to product

    LOKRING VH Al

    • For additional stabilisation of the LOKRING connection under mechanical loads.
    • Supports calibration of coiled…
    go to product

    LOKPREP 65G

    • Specially developed for the LOKRING assembly
    • Must be used for all LOKRING assemblies
    • Compensates for any…
    go to product

    GRATFIX N-E

    For quick and clean deburring of tubes, edges and steel plates.

    go to product

    AM-SV

    • For cleaning tube ends without scratching
    • Suitable for all surfaces
    • Solvent-resistant
    • Dimensions: 158 mm x 224…
    go to product

    LOKCLIP Al NK

    • For assembling hose-to-tube connections.
    • Plastic clip holder and two stainless steel clips included.


    IMPORT…

    go to product